13 Best Kitchen Sinks In India 2024

Written by Sakshi John
Edited by Pratibha Bagdy
Fact-checked by Riya Saini
Last Updated on
All products recommended on thebridalbox are independently selected by our editorial team. If you make a purchase through any of these links, we may receive a commission. Learn more about our product selection process.

A kitchen sink is that part of the kitchen that you can absolutely not forget to plan when you’re constructing a house or planning a renovation. Could you ever imagine a world in which a kitchen had no sink? Well, that’s how important a kitchen sink is to any household. However, is just having a kitchen sink enough? Will any kitchen sink do the job? If these are some of the thoughts that have been plaguing your mind, then you’re in the right place.

Kitchen sinks serve many uses. Apart from its conventional use of being utilized as a space for washing dishes, it can also serve as a space for rinsing vegetables and meats. When it comes to kitchen sinks, there are numerous options to choose from, which we have discussed below.

Types Of Kitchen Sinks

  • Farmhouse sink

This is also commonly called the apron sink. They usually extend to the edge of the countertop in the kitchen and are made up of nonporous material like cast iron or fireclay. Farmhouse sinks are easy to clean and are usually very durable. While they are gigantic and ideal for large families, their main downside is that they are difficult to install. Installation of a farmhouse kitchen sink involves cutting off a large portion of the kitchen countertop.

  • Undermount sink

Undermount sinks are relatively easy to install and as their name suggests, they are installed directly under the counter. They can also be easily cleaned and removed. Kitchens with marble or quartz countertops favor undermount sinks since the countertops do not require protection against stains and scratches.

  • Top mount sinks

Top mount sinks are commonly referred to as drop-in sinks. This type of sink can be easily fitted into the cut-out on the countertop. The rims of the sink are fixed over the countertop. The sink itself is held tightly in position through the use of clamps and bolts from underneath.

  • Bar sink

A bar sink is an additional sink that is installed in some kitchens. They are generally smaller and more shallow when compared to traditional sinks. They are used as wet bars in kitchens and serve as an ideal place for making cocktails, and other alcoholic beverages.

  • Corner sinks

As the name suggests, they are installed in the corner of the kitchen in an attempt to save space. Most corner sinks are dual bowl sinks where the primary bowl could be used for washing utensils and the other could be used for draining water from washed utensils. These sinks are quite suitable for small kitchens.

  • Prep sinks

These are usually used as secondary kitchen sinks and are used for washing vegetables and meat. They are commonly found close to the cooking range in a kitchen.

  • Single bowl sinks

This is the most common type of sink found in any kitchen. It consists of a single sink and comes in various sizes. They often have a good depth that makes them decent for washing large utensils. Unfortunately, a shortcoming of single bowl sinks is that they are not suitable for multitasking purposes.

  • Double sink bowls

Double sink bowls allow for washing on one side and drying or rinsing on the other side. These sinks are great for multitasking and help in getting work done quickly. However, there is a downside to double sink bowls. They are too big to fit in small kitchens and take up a lot of kitchen countertop space.

  • Integrated sinks

While the name might make it sound complicated, this type of sink is quite simple. It is a sink that integrates with the table countertop. The sink is made from the same material as the kitchen countertop. For instance, a kitchen with a granite countertop would have a granite sink. While it does look good, this type of sink cannot be easily removed or replaced.

To make things a little easier for you, here’s our list of the 13 best kitchen sinks in India.

13 Best Kitchen Sinks In India

1. ALTON Single Bowl Kitchen Sink

This matte finish kitchen sink by ALTON has thick rubber padding to reduce noise and condensation. This sink is laser cut and polished by hand to give it a smooth finish. The bottom part features a gentle slope to avoid clogging and stagnation. This allows the water to flow smoothly into the drain. The entire design of the sink makes it easy to clean and wash utensils. The dent-resistant build of this sink adds to its durability. The sink is deep enough to accommodate utensils like plates, cups, glasses, and serving dishes.

Pros

  • Stainless steel construction
  • Rustproof
  • Removable basket strainer
  • Leak-free design

Cons

  • Installation can be difficult

2. 10x Luxury Kitchen Sink

This drop-in style kitchen sink by 10x will instill a spark of elegance into your kitchen. This sink is ingeniously engineered with a sloped bottom to prevent water from stagnating in the kitchen bowl. The sink has been crafted at an optimized angle to reduce the possibility of breakages when placing glass into it. The sink is rust and corrosion-resistant. The company has made use of a sound barrier technology to absorb vibrations and reduce the sound while washing utensils in the sink. The 24-inch sink is bundled with the necessary accessories for installation.

Pros

  • Stainless steel build
  • Easy-to-clean
  • Spacious
  • Protective undercoating

Cons

  • Might bend easily

3. CROCODILE Single Bowl Kitchen Sink

One of the highlights of this sink is the drainboard that is attached to the sink. The sink is compact and good enough for an individual or a couple. The glossy finish of this sink adds to its visual appeal. The sink features a removable wastebasket strainer to accumulate food scraps and remove them easily from the kitchen sink. The company includes a PVC wastewater pipe with the sink. This product carries a warranty of 7 years.

Pros

  • Stainless steel construction
  • Flush-mount design
  • Anti-fungal coating
  • Sound deadening pads

Cons

  • Might not be easy to mount on the wall

4. 10x Matte Finish Stainless Steel Sink

This sink is quite spacious considering its medium size design. The 2 angled sides prevent water from stagnating and the sink is equipped with basket coupling to allow for the easy removal of waste. The company claims that its sink is built to withstand erosion agents like water and function optimally for years to come. Given its simple yet fashionable looks, it will suit most modern as well as traditional kitchens.

Pros

  • Reduces vibrations and noise
  • Stainless steel build
  • Provides excellent drainage
  • Prevents condensation build-up

Cons

  • May be prone to rusting after prolonged usage

5. ZINZER Quartz Kitchen Sink

This 24-inch sink by ZINZER is made out of almost 80% pigmented quartz. This not only makes it visually attractive but also strong and durable. To ensure longevity, the company has made this sink with a special polymerization technology. The inner surface of the sink has a stick-free coating to ensure that dirt does not stick to the sides of the sink. The brilliance of this sink lies in its ease of installation. The sink can be effortlessly installed in top mount, flush-mount, or under-mount. The company provides a 5-year warranty in case of any manufacturing defects.

Pros

  • Available in different colors
  • Stain, scratch, and heat-resistant
  • Easy-to-clean
  • Odor-free

Cons

  • It may not be deep enough for washing large cooking utensils.

6. RENVOX Premium Kitchen Sink

This RENVOX single bowl kitchen sink has a highly polished and glossy finish that will make it stand out in almost any kitchen. This sink is easy to install and remove, and features carefully designed curves at the bottom sides of the sink, allowing water to easily flow down into the drainpipe. This eliminates clogging and water stagnation. It is ideal for use by an individual or a family of 2. As an added advantage, washing vegetables and utensils in this sink is seamless and effortless.

Pros

  • Constructed from stainless steel
  • Rustproof
  • Compact design
  • Removable wastebasket

Cons

  • Might be prone to scratches

7. SILVER LINE Low Radius Kitchen Sink

The double-bowl design makes it easy to separate breakable utensils from nonbreakable ones. Given its looks and form factor, it is well suited for a modular kitchen. This sink supports both undermount and drop-in type of installations. With a total length of 37 inches, the dual design sinks are ideal for families of 4 or 5. To ensure longevity, the company has made use of 1 mm thick stainless steel. The use of undercoating and sound suppression pads absorb vibrations and sounds, enhancing the experience of washing dishes.

Pros

  • AISI 304 Stainless steel
  • Satin finish
  • Low radius design
  • Impact and corrosion-resistant

Cons

  • May not fit in all kitchens

8. ZESTA Single Bowl Kitchen Sink

This 24-inch square-shaped kitchen sink by ZESTA looks elegant and classy. The commercial-grade satin finish not only adds to its grandeur but also reinforces its strength. The company implements non-toxic suppression pads to reduce vibrations. The gentle slope towards the bottom of the sink allows for complete drainage of wastewater. The sink has been designed at an optimal angle to minimize the possibility of damage to glassware. Included with the main unit are the kitchen sink coupling, fruit basket, and waste pipe.

Pros

  • 304-grade stainless steel
  • Rust, corrosion, and dent resistant
  • Soundproofing technology
  • Leak-free design

Cons

  • The coating may wear off.

9. ROYAL SAPPHIRE Double Bowl Sink

The well-polished and glossy appearance of this dual bowl sink will brighten up any kitchen. The sink is fairly large with a length of 45 inches. This makes it ideal for large-sized families, where there are numerous utensils to wash. The sinks have a slight curve towards the bottom, allowing gravity to work and wastewater to easily drain out through the pipe. All accessories for installation are packed and parceled with the sink.

Pros

  • Stainless steel construction
  • Rust and corrosion-free
  • Removable wastebasket
  • Dual bowls

Cons

  • The middle of the sink might be a little flimsy.

10. ASTER High-Grade Double Bowl Kitchen Sink

This 37-inch sink by ASTER is renowned for its indestructible construction. One of the most striking features of this double bowl sink is its depth. Each sink boasts a depth of 18 inches, making it large enough to accommodate numerous utensils. The rectangular design with its gently sloped bottom provides for quick discharge of wastewater. This sink is user-friendly as it is easy to install, clean, and maintain. This sink is ideal for a family of 4 or 5, and the company slaps a warranty of 7 years on this product.

Pros

  • Large and deep sink
  • R-angle design
  • Scratch-resistant
  • Removable wastebasket

Cons

  • It may not fit in smaller kitchens.

11. Lipka Square Bowl Kitchen Sink

When on the lookout for the best of kitchen sinks in India, this one shouldn’t get past your eye. Its brilliant engineering is the reason it is on our list. Lipka makes use of a 4mm thick foam pad below the sink to give it a weightless design. This helps to improve the sound dampening effect and also reduces vibrations when washing utensils. The gentle slope towards the bottom of the sink prevents water from flooding the bowl. To add more to its awesomeness, the sink is 15 inches in length and compact in size.

Pros

  • Stainless steel
  • Lifetime warranty
  • Designed for complete drainage
  • Elegant and glossy design

Cons

  • Might be prone to scratches

12. CITRA Under Mount Single Bowl Kitchen Sink

This 23-inch wide sink by CITRA has a single bowl design and is made out of T304 Stainless steel. The company has used 1.5mm thick steel to ensure a scratch and crack-free experience. The extra-thick rubber pads cover 80% of the sink to reduce vibrations. The well-engineered channel grooves allow water to pass swiftly into the drain pipe. The sink has a removable wastebasket for quick removal of leftover food particles. The steel sink size is good enough for rinsing vegetables, fruits, and washing utensils.

Pros

  • Allows quiet washing
  • Non-toxic undercoating
  • Multi-functional dish grid
  • Dent resistant

Cons

  • Installation may not be very easy

13. SS Sink Single Bowl Kitchen Sink – Silver Chrome

This 18-inch single bowl kitchen sink is compact in terms of its design. The sink has a depth of 16 inches which makes it suitable for a small-sized family. The edges are curved, keeping in mind a smooth flow of water through the sink strainer and into the drain pipe. The sink has been designed to avoid the breakage of fragile utensils like those made out of glass.

Pros

  • Stainless steel construction
  • Glossy chrome finish
  • Removable wastebasket
  • Seamless discharge of wastewater

Cons

  • Might rust after prolonged usage
*The prices provided in this article are based on the latest available information. However, they may vary due to changes in pricing by the seller and/or promotional offers.

Have you decided which kitchen sink to purchase? If you have your eyes on one, keep it on hold till you have a look at what you need to look out for in a kitchen sink. Below are a few things to bear in mind while choosing the right kind of kitchen sink in India.

How To Choose The Right Kitchen Sink In India?

  • Size of the sink

One of the most important considerations when purchasing a kitchen sink is the size of the sink and the kitchen. The size of the sink is to be determined with respect to the size of the countertop in your kitchen. For kitchens lacking in space, single bowl sinks work better than dual bowl sinks. Before purchasing a sink, be sure to check the dimensions of the kitchen countertop.

  • Shape of the sink

The usual shape seen in almost every Indian kitchen is a rectangular-shaped sink. This is mainly because of the kitchen countertop dimensions and traditional kitchen construction. However, kitchen sinks are available in different shapes, including oval, round, and triangular kitchen sinks. Out of all, triangular ones are the least popular owing to the difficulty in washing utensils.

  • Material and durability

2 of the most common materials when it comes to sinks include porcelain and stainless steel. Some other options include enamel coated cast iron, granite, and quartz acrylic sinks. In terms of durability, stainless steel sinks wear the crown. A close second is porcelain sinks, followed by quartz acrylic sinks.

  • Number of bowls

Consumers have the choice of choosing between a single bowl sink or a double bowl sink. While single bowl sinks are great for large utensils, they are restrictive in terms of multitasking. It isn’t possible to wash vegetables, dishes, and dry dishes very conveniently in a single bowl sink. This problem is eradicated with a double bowl sink that is best suited for larger families. However, a downside to double bowl sinks is that they take up a lot of countertop space in the kitchen.

Frequently Asked Questions

1. Should I get a 16 or 18 gauge sink?

While both 16 and 18 gauge sinks are good in terms of usability, the better one out of the 2 is the 16 gauge sink. This is because a 16 gauge sink has a thickness of 0.0625 inches while an 18 gauge sink has a thickness of 0.05 inches.

2. Is a single sink or double sink better?

The answer to this lies in the kind of work to be carried out in the sink. However, both single and double sinks have their own pros and cons. While a single sink tends to be more spacious and accommodates larger utensils, the utensils cannot be divided. While double bowl sinks allow for division of work, they tend to take up too much space. Both are good but for different purposes.

3. Do all stainless steel sinks crack easily?

No, stainless steel sinks are some of the best sinks in terms of durability. They are rust and corrosion-resistant. They also do not chip or crack easily. While they are durable, they can crack due to the overuse of certain abrasive detergents. A rule of thumb is— the thicker the stainless steel, the less likely it is to crack.

A kitchen cannot function efficiently without a kitchen sink as they help provide a designated area to wash your dishes while managing clutter. When choosing the right sink, consider factors such as the sink’s size, shape, material, and durability for long-lasting and easy use. Besides, ensure it is made from stainless steel as it is easier to clean and sturdy. Moreover, make sure to choose an aesthetically pleasing sink as it will add to the look and feel of your kitchen. Various designs and styles are available, such as corner sinks, single bowls, undermount sinks, and more to suit your kitchen’s space and requirements. However, check that the sink is leakproof, rustproof, has various accessories, non-toxic coating, and is easy to install for a smooth user experience.


Community Experiences

Join the conversation and become a part of our vibrant community! Share your stories, experiences, and insights to connect with like-minded individuals.

Pratibha holds a master's degree in English from Madras University and has qualified UGC-NET. A bookworm from a young age, she devours books and digital humanities to nourish her writing projects. Pratibha began her writing career in 2018 and has experience writing formal, informal, and technical content.

Read full bio of Pratibha Bagdy
Riya did her graduation in English from the University of Delhi and post graduation in English from Indira Gandhi National Open University. She started her journey as a writer in 2020 and has written content for various technical, marketing and lifestyle websites.

Read full bio of Riya Saini